TFC Membrane for RO System for home drinking water is industry’s most reliable high rejection thin film composite (TFC) reverse osmosis (RO) membrane.
Advanced membrane technology and automated fabrication allow it to deliver consistent performance that you can rely on. The membrane elements are NSF/ANSI Standard 58 listed. The home drinking water elements are rated a 50 psi and will purify about 20% more water than competitive elements rated at 60 psi.
Removes over 99% of:
• Most Inorganic Salts
• Silica phosphates
• Heavy metals
and almost all high molecular weight organics in the water.
The first full tank of permeate should be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting.
Note: Membranes must be matched with flow restrictors. Always change the flow restrictor when changing the membrane size on your system.
Membrane Type: Polyamide Thin-Film Composite
Stabilized Salt Rejection: 99%
Maximum Operating Temperature: 113°F
Maximum Operating Pressure: 300 psig
Maximum Feed Flow Rate: 2.0 gpm
Free Chlorine Tolerance*: < 0.1 ppm
Compatible Anchor RO Models
AF-5002 - 5-Stage RO Water Filter – 50 GPD (Pre April 2021 Models)
- AF-5002 - 5-Stage RO Water Filter – 75 GPD
- AF-5003 - 5-Stage RO Water Filter – 100 GPD
- AF-5004 - 6-Stage RO Water Filter – 50 GPD (Pre April 2021 Models)
- AF-5004 - 6-Stage RO Water Filter – 75 GPD
- AF-5005 - 6-Stage RO Water Filter – 100 GPD
AF-1007 - TFC Membrane for RO System - NSF - 50/75/100 GPD
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Good Service from the time of ordering to delivery & Follow up.